Table of Contents
Advertisement
SELECTING SONG-PERFORMANCES
Panel selection
To select a Song Performance, WK4 must be set
to Song mode.
1. Press the SONG-P button to open the «Se-
lect Song-Performance» window.
2. Select a Song-Performance with the corre-
sponding Soft button.
Note: When you select a Song-Performance,
WK4 sends CC00 [value 64]-PC messages in
rapid succession on the Common Channel.. The
BankSelect, ProgramChange, Volume and Pan
messages of the tracks are sent on the normal
MIDI channels.
Note: If PLAY or STOP are pressed, the Song-
Performance recorded in the Song is recalled (the
initial one or the most recent one). All temporary
modifications will, therefore, be cancelled .
Note: If a Song-Performance is selected in
record mode, the selection number specified is
recorded in the Master Track.
SELECTION VIA MIDI
To select a Song via MIDI, the selection mes-
sage must be sent to WK4 on the Common Chan-
nel. Send the Control Change 00 [Value 64] and
a Program Change message in rapid succession.
Message...
CC00 [64] - PC [1...8]
selects...
Song-Perfs 1...8
Song-Performance select
with the Soft buttons
Selection/Help 10•7
Advertisement
Table of Contents
