Regulating the Send levels
Each track of the current Performance can be
independently adjusted for the amount of Reverb
or Modulation effect applied.
The SEND LEVEL function of the Edit Effects
page gains access to the parameters.
1. Press the EFFECTS button in the EDIT section then
press the Soft button F2 to activate the SEND
LEVEL parameter.
The display shows the Send Level values of
each track (depending on the current mode).
If Style/RealTime mode is selected, the Group
parameter will be fixed.
If Song mode is selected, the Group param-
eter will be variable.
2. Select the track that needs to be modified.
Use the Track select soft buttons A ... H.
To bring other tracks into view, use the
directional arrow.
3. Select the Send level parameter that you wish to
regulate.
Use the directional arrows to select E1 or E2
as required. E1 corresponds to the Reverb
effects, E2 to the Modulations.
1
2/3
Digital Signal Processor 9•5