Security Code
You can set a 4-digit password to prevent job changes by unauthorized users. This password locks
out the ability to change dispense time, clear the shot count and modify settings in Memory. The
password is required to access the Security screen. Unauthorized users get a Password Error
message if they attempt to enter an invalid password.
To select the functions to password protect
•
Press MENU.
•
Press the up/down arrow to highlight SECURITY, then press SELECT.
•
For first time users, enter 0000 as the current password and press ENTER (0000 is the default
setting).
•
Press the up/down arrows to highlight the functions to protect (Memory, Shot Count and Time).
•
Press SELECT to toggle between adding or deleting a checkmark next to each function. To
protect the function from unauthorized changes, add the checkmark. To disable the password
and allow any user to change settings, delete the checkmark.
•
Press HOME to return to the Home screen.
To change the password
•
Press MENU.
•
Press the up/down arrow to highlight SECURITY, then press SELECT.
•
For first time users, enter 0000 as the current password and press ENTER (0000 is the default
setting).
•
Press PASSWORD.
•
Press the left/right arrows to highlight the first number.
•
Press the up/down arrows to set the number. Or if you prefer, you can also use the timer dial.
•
Repeat to adjust the other numbers in the 4-digit code.
•
Press ENTER. This puts you in the Security screen and automatically stores the new password.
•
Press HOME to return to the Home screen.
Menu
Functions
21