ACTi ACM-7511 Series Hardware User Manual
Ip d/n ccd poe outdoor rugged dome
Hide thumbs
Also See for ACM-7511 Series:
- Specifications (2 pages) ,
- Quick installation manual (12 pages) ,
- Installation instructions (5 pages)
Related Manuals for ACTi ACM-7511 Series
Summary of Contents for ACTi ACM-7511 Series
- Page 1 IP D/N CCD PoE Outdoor Rugged Dome ACM-7511 series Ver. 120312 Hardware User’s Manual...
-
Page 3: Trademarks
PRECAUTIONS Read these instructions You should read all the safety and operating instructions before using this product. Heed all warnings You must adhere to all the warnings on the product and in the instruction manual. This symbol highlights several areas of concern. Please read descriptions next to each symbol carefully. - Page 4 equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
-
Page 5: Table Of Contents
Table of Contents PRECAUTIONS________________________________________________ 0-1 Trademarks ________________________________________________________________ 0-1 Liability ___________________________________________________________________ 0-1 FCC/CE Regulation __________________________________________________________ 0-1 INTRODUCTION ______________________________________________ 1-1 Package Contents _______________________________________________ 1-1 Features and Benefits ____________________________________________ 1-2 Safety Instructions ______________________________________________ 1-4 Physical Description _____________________________________________ 1-6 Installation Procedure ___________________________________________ 2-9 Connecting the IP D/N CCD PoE Outdoor Rugged Dome ______________ 2-9 2.1.1 Remove the cover ____________________________________________________ 2-9 2.1.2... -
Page 7: Introduction
INTRODUCTION 1.1 Package Contents ACM-7511 Product CD Terminal Blocks for Power, DI/O & Audio Warranty Card Drill Template Mount Screws BNC Cable... -
Page 8: Features And Benefits
1.2 Features and Benefits The IP D/N CCD PoE Outdoor Rugged Dome series is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding images quality (D1, 720x480) at reasonable bandwidth through a standard TCP/IP network. That is because it is Ethernet (LAN and WAN) ready and has the powerful ARM9 SoC and the MPEG-4 compression ASIC inside. - Page 9 (Dynamic Domain Name Server). Users can set this IP device at a virtual domain name (such as cam1.Taipei.xxx) that is linked with its dynamic IP via DDNS service. Everyone can use the virtual domain name to view the video from anywhere with internet acess. Built-in Hardware Motion Detection No more external motion sensors are required.
-
Page 10: Safety Instructions
1.3 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel if you use a power supply with a different voltage than the one marked on this device. All warranty of this product will be voided in the above situation. - Page 11 Safety Check Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.
-
Page 12: Physical Description
1.4 Physical Description... - Page 13 Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button with a pointed object. Reconnect the power cable while still holding the reset button. Step 3: Keep the reset button depressed for at least 16 seconds before releasing it.
- Page 14 Power Input Connect the power adaptor here if your power input is DC12V. Please follow the description on the connector to connect to power. NAME DESCRIPTION DC Power Input Ground Pin Conduit Hole These conduit holes provide alternative cable routing choices for different mounting scenarios.
-
Page 15: Installation Procedure
Installation Procedure There are three types of installation of this IP D/N CCD PoE Outdoor Rugged Dome series. Surface mount Flush mount Wall mount Pictures ● ● Optional Bracket required The mounting procedure can be divided into two parts, 1st: Connecting the IP D/N CCD PoE Outdoor Rugged Dome series : Mounting the IP D/N CCD PoE Outdoor Rugged Dome series 2.1 Connecting the IP D/N CCD PoE Outdoor Rugged Dome... -
Page 16: Insert The Cable
2.1.2 Insert the cable There are two conduit holes, one is at the dome bottom and the other one is at the side of rugged dome with plug. Remove the plug if your cable will go through the one at the side of rugged dome 2.1.3 Connect cables to connectors Please follow the instruction at Chapter 1.4: Physical Description, for how... - Page 17 2.1.4 Description There are three LEDs in the system. They are indicators for power, fan and heater respectively. According to the operating temperature, different LEDs will be lighted under different situations. 2-11...
-
Page 18: Mounting The Ip Outdoor Fixed Dome (Surface)
2.2 Mounting the IP Outdoor Fixed Dome (Surface) 2-12... -
Page 19: Mounting The Ip Outdoor Fixed Dome (Flush)
2.3 Mounting the IP Outdoor Fixed Dome (Flush) 2-13... -
Page 20: Mounting The Ip Indoor Fixed Dome (Wall)
2.4 Mounting the IP Indoor Fixed Dome (Wall) 2-14... -
Page 21: Adjusting The Camera
Adjusting the camera 3.1 Adjust zoom and focus Please adjust the camera direction first. Then move the focus and the zoom lever at the picture 1 to adjust the zoom and the focus. Fix the zoom and focus after adjusting. 3.2 Adjust camera functions Refer to picture 1 for what can be adjusted and how to adjust. -
Page 22: Product Specification
Product Specification 4-16...
Need help?
Do you have a question about the ACM-7511 Series and is the answer not in the manual?
Questions and answers