Placing A Call On Hold; Transferring Calls; Conference - NEC Xen IPK II User Manual

Placing a Call on Hold

Exclusive Hold
With a call in progress:
Press Hookswitch
Note 1: Replacing the handset when a call is on hold will cause the held call to
immediately ring your station.
Note 2:
Once a call is placed on hold, the telephone can be used to place another
internal or outside call, or access a feature (i.e. Call Pickup). Press
Hookswitch again to return to the original party and place the second party on
hold.

Transferring Calls

With a call in progress:
Press Hookswitch
Dial station number
Announce call (optional)
Replace handset
Note 1:
If the called station is busy, replacing handset will initiate a camp-on. An
unanswered camp-on or ring transferred call will recall to your telephone after
a preprogrammed time interval.
Note 2:
To return to the original party, press Hookswitch twice.
Note 3:
To transfer a call directly to a personal voice mailbox, dial 8 after dialling the
station number.

Conference

With a call in progress:
Press Hookswitch
Dial #1
Dial the party you want to add and wait until they answer
Press Hookswitch and repeat the third step to add more parties
-OR-
Press Hookswitch twice to set up the conference
5