General Information; Answering Calls - NEC Xen IPK II User Manual

General Information

The following should be considered when reviewing this User Guide:
Access to many features is based on system assignments. Some access
codes may vary from those stated in this user guide and not all features may
be available from your telephone.
The FLASH or RECALL key located on certain models of Analogue
Telephones can be used in place of the Hookswitch.

Answering Calls

Ringing Calls
Lift the handset
Converse
Note 1:
Distinctive ringing tones are provided for internal and outside calls.
Note 2:
When Delayed Ringing feature is assigned, incoming calls will first ring at a
primary station. If the call is unanswered after a preprogrammed time interval,
calls will also ring at the assigned secondary station.
Off-Hook Signalling
With a call in progress:
Receive Off-Hook Signalling
Replace handset to disconnect the current call
Lift the handset to converse with new call
3