Section 5: Maintenance; General; Keeping Tool Clean - Grizzly T10745 Owner's Manual

section 5: maintenance

always disconnect
before servicing, adjusting, or doing
maintenance to reduce the risk of
accidental injury or electrocution.

general

regular periodic maintenance on the
Model t10745 Belt sander will ensure its
optimum performance. Make a habit of
inspecting the sander each time you use
it. Check for the following conditions and
repair or replace when necessary:
• loose fasteners.
• Worn switch.
• Worn or damaged cords and plugs.
• Worn or damaged sanding belt.
• any other condition that could hamper
the safe operation of this tool.
-12
-
!
the Model t10745 Belt sander will give
you years of trouble free service if you keep
it clean and free of built-up dust or grime.
if air passages get blocked, blow them out
with compressed air.
plastic parts can easily be cleaned with a
poWer
damp cloth, but never use water to clean
any electrical parts. solvents should also
be avoided on plastic because of the pos-
sibility of damage.
if possible, use a scraper to remove glue
or sap from your work; these elements may
hinder the effectiveness of the abrasive belt
and cause unnecessary build-up of grime
on the sander.

Keeping tool clean

Model T10745
1
⁄ " x 18" Belt Sander
2