Usb Board - HP Pavilion g7 Maintenance And Service Manual

USB board

Description
USB board (includes cable)
Before removing the USB board, follow these steps:
1. Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Remove the service door (see
6. Remove the optical drive (see
7.
Remove the hard drive (see
8.
Remove the keyboard (see
9. Remove the top cover (see
Remove the USB board:
1. If not released already, release the ZIF connector (1) to which the USB board cable is connected,
and then disconnect the USB board cable from the system board.
2. Pry the clip (2) that secures the USB board to the base enclosure.
3. Remove the USB board and cable by lifting straight up (3).
ENWW
Battery on page 36).
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page 48).
Top cover on page 51).
37).
38).
41).
Component replacement procedures
Spare part number
682752-001
69