Power Connector - HP Pavilion g7 Maintenance And Service Manual

Reverse this procedure to install the USB board.

Power connector

Description
Power connector (includes cable)
Before removing the power connector, follow these steps:
1.
Shut down the computer.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the service door (see
6. Remove the optical drive (see
7.
Remove the hard drive (see
8.
Remove the keyboard (see
9.
Remove the top cover (see
Remove the power connector:
1. Disconnect the power connector cable (1) from the system board.
2.
Remove the power connector from the base enclosure (2).
Reverse this procedure to install the power connector.
70 Chapter 4 Removal and replacement procedures
Battery on page 36).
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page 48).
Top cover on page 51).
37).
38).
41).
Spare part number
682744-001
ENWW