HP Pavilion g7 Maintenance And Service Manual page 88

2. Remove the PCH heat sink by lifting straight up (2).
NOTE:
system board components, it may be necessary to move the heat sink from side to side to
detach it.
NOTE:
the system board components each time the heat sink is removed. Replacement thermal material is
included with the base enclosure, heat sink, processor, and system board spare part kits.
Reverse this procedure to install the PCH heat sink.
80 Chapter 4 Removal and replacement procedures
Due to the adhesive quality of the thermal material located between the heat sink and
The thermal material must be thoroughly cleaned from the surfaces of the heat sink and
ENWW