Control Assign - Source Audio Soundblox 2 User Manual

to control any individual knob parameter.
MIDI control mode. Select this mode to enable MIDI I/O
M IDI:
•
through the Soundblox 2 MIDI Interface
Hot Hand mode. Select HH to enable Hot Hand control.
H H:
•
By default, Hot Hand will be assigned to control the morph
parameter. Hot Hand can also be also be assigned to control any
individual knob parameter.
Press the NOISE GATE button again while holding the TONE SHAPE
button to resume normal Noise Gate adjustments.

CONTROL ASSIGN

By default, all external control units (Hot Hand, Expression Pedal, or
MIDI) are mapped to control the morphing function, but it may be desir-
able to assign external control to an individual knob parameter. To assign
control to a knob:
1. Ensure that you are in external control edit mode (NOISE GATE LEDs
are red)
2. Select the desired external control option: EXP for expression pedal,
HH for Hot Hand, or MIDI.
3. Press and hold the NOISE GATE button until the red LED begins to
blink slowly.
4. Select the knob to which you would like to assign external control and
turn it to the desired low position.
5. Press the NOISE GATE button again; the LED will start blinking rapidly.
6. Set the assigned knob to your desired high position.
7. Press the NOISE GATE button one more time to complete the assign-
ment. The LED will blink three times, indicating the process is complete.
To return to the default Morph control, set the external control to OFF.
Press and hold the NOISE GATE button again until all three LEDs blink
External Control | 17