Factory Reset - Source Audio Soundblox 2 User Manual

Guitar micromodeler overdrive fuzz distortion

Hide thumbs Also See for Soundblox 2:

Table of Contents

TONE SHAPE

There are three selectable EQ shapes: TREBLE, MID, and BASS. This

control works in conjunction with the TONE knob. Press the TONE SHAPE

button to scroll through the three tone control options. The TONE knob

will adjust the level of cut or boost for the selected frequency range. The

three tone shapes can be set independently and will not affect each other.

If you need to quickly set all of the three bands back to the default flat

setting (the 12 o'clock knob position), simply press and hold the TONE

SHAPE button for 2 seconds. The TREBLE, MID, and BASS LEDs will

rapidly blink three times, indicating that they have been reset.

FACTORY RESET

Should you wish to perform a factory reset, unplug the power supply from

the pedal, then press and hold the TONE SHAPE button while plugging

the power supply back in. Continue holding the TONE SHAPE button until

the 1 and 2 preset LEDs blink in succession — this will erase any saved

presets.

TREBLE

MID

BASS

TONE

SHAPE

(HOLD)

FLAT

Press button to

select option

Controls: Buttons | 11

Table of Contents

Do you have a question about the Soundblox 2 and is the answer not in the manual?

Soundblox 2 ofd overdrive fuzz distortion