Tandberg Data DLT VS160 Installation And Operation Manual page 4

Tandberg Data
3.2.1 Key to Indicators
3.2.1.1 Indicator Activity During
Power-On Self-Test (POST)
3.2.1.2 Indicator Activity During Normal Operation:
Ready LED
3.2.1.3 Indicator Activity During Normal Operation:
Fault/Clean/Media LEDs
3.2.2 Unload/Eject Button Features
3.2.2.1 Unload/Eject Button Feature Description
3.3 Using Cartridges
3.3.1 Loading a Cartridge
3.3.2 Unloading a Cartridge
3.3.3 Cartridge Write-Protect Switch
3.3.4 Caring for your Cartridges
3.3.5 Using the Cleaning Cartridge
4 Troubleshooting
4.1 Obtaining Drivers and Firmware Upgrades
4.2 Troubleshooting the Drive
4.2.1 Power-On Self-Test (POST) and
Drive Connectivity Failure
4.2.2 If the Drive Becomes Unresponsive
4.2.3 Drive Makes Noises During System Startup
4.2.4 Drive Failures During Backup or Restore Operations
4.2.5 Tape-Backup Software Errors
ii Tandberg DLT VS160 Installation and Operations Manual
Table of Contents
3-1
3-2
3-3
3-3
3-4
3-5
3-6
3-6
3-7
3-8
3-8
3-9
4-1
4-1
4-1
4-1
4-9
4-9
4-9
4-10