Fault Check List - NewAir AC-10100E Owner's Manual

FAULT CHECK LIST

The air conditioner does not run.
The unit does not produce enough
cooling.
The unit does not cool at all.
The unit is noisy.
The compressor does not work.
☆ NEVER TRY TO REPAIR OR DISMANTLE THE UNIT YOURSELF. UNAUTHORIZED REPAIRS CAN
VOID YOUR WARRANTY AND ENDANGER THE UNIT.
Ÿ
Is the air conditioner plugged in?
Ÿ
Is the power outlet functioning correctly?
Ÿ
Is the full water tank indicator light flashing?
Ÿ
Is the ambient room temperature lower than
the set temperature?
Ÿ
Is the unit placed in direct sunlight? If so, close
any curtains or move the unit to a more
shaded area.
Ÿ
Are too many windows or doors open?
Ÿ
Are there too many people in the room?
Ÿ
Are there additional heat sources in the room?
Ÿ
Is the filter dusty or dirty?
Ÿ
Is the air inlet or air outlet blocked?
Ÿ
Is the ambient room temperature lower than
the set temperature?
Ÿ
Is the machine positioned unevenly? Make
sure the air conditioner is positioned on an
even, solid surface.
Ÿ
It is possible the overheat protection of the
compressor is on. If so, wait for the
temperature to drop and then turn on the unit
again.