Dimplex ESSW2 Owner's Manual page 14

installation instructions
Figure 9
Sensor Well
Figure 10
14
11.
12.
13.
Detail A
!
nOTE: plumbing connections and
plugs can be reversed, as long as
the outlets are located at the top of
the panels.
!
nOTE: only use the sensor well
that is closest to the outlet.
1-4 for assembly of the top
mounting assemblies.
Assemble the clamping as-
semblies (Figure 7) then
insert them into the support
brackets and tighten only to
hold in place.
place each Solar Collector on
clamp assemblies, so that the
sensor wells are located on
the outside of the assembly
and the clamps are securely
resting on the brackets.
Connect the solar collectors
together, using the provided
Stainless Steel flexible con-
nectors, Figure 10, which
will allow for expansion and
contraction due to changing
weather conditions and install
www.renewables.dimplex.com