Dimplex ESSW2 Owner's Manual page 11

Site Selection and Preparation
board or a "mounting wall".
For the double wall system installation the wall
area required is approximately 4' x 4' (122 cm x
122 cm).
For the single wall system installation the wall area
required is approximately 2' x 4' (61 cm x 122 cm).
CauTiOn: protection against auto-ignition of
combustibles: Combustible materials used in soar
equipment and adjacent structures shall not be ex-
posed to an elevated temperature that could cause
ignition.
CauTiOn: Access to the Solar Controller, pres-
sure relief valves and the connecting cables must
be ensured, for monitoring and maintenance of the
system.
Consideration of the location of the unit should
also allow for a 120V GFI receptacle to be located
in the same vicinity to allow for the Solar Controller
to be plugged in.
11