Recalling An Operating State - Agilent Technologies U8030A Series User Manual

2 Operation and Features
Memory Operations

Recalling an operating state

N O T E
48
1 Recall a previously stored operating state.
• Press and hold the [Memory] button until the M1
annunciator stops blinking.
• The M1 annunciator turns on.
• The display shows the settings stored in the M1
memory location.
2 Turn the knob to show the settings saved in M1, M2,
and M3 memory locations.
• The M1, M2, and M3 annunciators will turn on in a
round- robin manner.
• The display shows the settings stored in the M1 , M2,
and M3 memory location in a round- robin manner.
3 Press the [Memory] button again to recall the stored
operating state in the chosen memory location.
• The display will show dOnE.
• The M1, M2, and M3 annunciators turn off.
To cancel this operation, allow the unit to idle for five seconds.
U8030A Series User's Guide