Enable The Memory Output Loop Operation - Agilent Technologies U8030A Series User Manual

2 Operation and Features
Memory Output Operations

Enable the memory output loop operation

50
• The Δt annunciator turns off, and all the M1, M2, and
M3 annunciators turn off.
1 Enable the memory output loop operation.
• Press and hold the [Memory Output] button until the Δt
annunciator starts to blink. (The Δt annunciator turns
on first before it starts to blink.)
• All the M1, M2, and M3 annunciators turn on.
• The operating state from M1 memory location is
recalled immediately.
• The M1 annunciator blinks. The M2 and M3
annunciators are steadily on.
• After waiting for Δt
memory location is recalled.
• The M2 annunciator blinks. The M1 and M3
annunciators are steadily on.
• After waiting for Δt
memory location is recalled.
• The M3 annunciator blinks. The M1 and M2
annunciators are steadily on.
• After waiting for Δt
memory location is recalled.
• The process is repeated infinitely until canceled.
2 Cancel the memory output loop operation.
• Pressing the [Memory Output] button during the memory
output loop operation will terminate the operation
immediately.
• All outputs will be disabled.
• The OFF annunciator turns on.
, the operating state from M2
1
, the operating state from M3
2
, the operating state from M1
3
U8030A Series User's Guide