Program The Memory Output Time Interval - Agilent Technologies U8030A Series User Manual

Program the memory output time interval

N O T E
U8030A Series User's Guide
1 Edit the memory output time interval.
• Press the [Δt] button.
• The Δt annunciator turns on.
• By default, the M1 annunciator turns on indicating Δt
is being selected for adjustment.
• To select Δt or Δt
2
corresponding M2 or M3 annunciator turns on.
• The display shows the time interval in seconds, with
the integral part on line 1 and the fractional part on
line 2.
• Press the [Δt] button to change the cursor position.
Turn the knob to adjust the value. The time interval
can be set with a resolution up to 10 ms.
• You can set the time interval within the range of 0 s to
9999.99 s.
• Press and hold the [Δt] button to save the setting.
• The display shows dOnE.
To cancel this operation, allow the unit to idle for five seconds.
Operation and Features
Memory Output Operations
, press the [Memory] button until the
3
2
1
51