Memory Operations; Storing An Operating State - Agilent Technologies U8030A Series User Manual

Memory Operations

Storing an operating state

N O T E
U8030A Series User's Guide
Up to three operating states can be stored in the
non- volatile storage locations. The storage feature remembers
the voltage and current limit value settings; OVP and OCP
on or off states; and OVP and OCP trip levels. The following
steps show you how to store and recall an operating state.
1 Store the power supply current operating state.
• Press the [Memory] button.
• The M1 annunciator will blink.
2 Turn the knob to choose the memory location for
storing the operation state.
• The M1, M2, and M3 annunciators will blink in a
round- robin manner.
3 Press the [Memory] button again to save the current
operating state in the chosen memory location.
• The display will show dOnE.
• The M1, M2, and M3 annunciators turn off.
To cancel this operation, allow the unit to idle for five seconds.
Operation and Features

Memory Operations

2
47