Table 1-4 Lcd Display Legends And Descriptions - Agilent Technologies U8030A Series User Manual

U8030A Series User's Guide

Table 1-4 LCD display legends and descriptions

Legend
1 M1
2 M2
3 M3
Δt
4
5 LOCK
6 LIMIT
7 OFF
8 88.88 V
9 8.88 A
10 88.88 V
11 8.88 A
12 OVP1
13 OCP1
Your Power Supply in Brief
Description
Stores the current power supply operating state in
the power supply non-volatile memory.
When the power supply is in the calibration mode,
these states can be used to store the calibration
constants.
When the Δt annunciator is steady, the single
memory output operation is active.
When the Δt annunciator is blinking, the loop
memory output operation is active.
Front panel operation is disabled.
The voltage and current limit values are shown in
the display.
All the power supply outputs are disabled.
Line 1: Voltage and current values display for
Output 1.
Line 2: Voltage and current values display for
Output 2.
When the OVP1 annunciator is steady, the
overvoltage protection function for Output 1 is
enabled.
When the OVP1 annunciator is blinking, an
overvoltage condition has occurred. The power
supply output is disabled until the trip is cleared.
When the OCP1 annunciator is steady, the
overcurrent protection function for Output 1 is
enabled.
When the OCP1 annunciator is blinking, an
overcurrent condition has occurred. The power
supply output is disabled until the trip is cleared.
Introduction 1
31