Audio Connections - Pioneer PDP-50MXE20 Technical Manual

Video Card: PDA-5003/PDA-5004

4.4.11 Audio connections

Before making connections, be sure to check that the
audio component's power and the display's main power
is off.
Connect an audio component to the audio
input jack of the Plasma Display with installed
video card.
When the video card is installed, the Plasma Display
provides four or five audio input jacks and one audio
output jack. Consult the following chart to choose the
proper audio input for each video input.
Video
Audio input
input
INPUT1 Stereo mini jack (L/R)
INPUT2 Stereo mini jack (L/R)
INPUT5 Pin jacks (L/R)
*1
INPUT3 Pin jacks (L/R)
*1
INPUT4 Pin jacks (L/R)
*1
When using the PDA-5003, the INPUT3 and INPUT4
audio input connectors are shared.
Audio connection for component connected to
INPUT1
OUTPUT INPUT1 INPUT2
AUDIO
AUDIO AUDIO
A stereo miniplug cable can be used to connect the
audio output from the component connected to
INPUT1, to the Plasma Display's AUDIO (INPUT1) jack
(L/R).
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals
according to the video input selection.
94
Sound output
Sound of the selected
video input is output from
the
• SPEAKER (L/R) terminals
• Stereo mini jack (L/R).
[50MXE20 : 42MXE20]
Audio connections for component connected to
INPUT2
OUTPUT INPUT1 INPUT2
AUDIO AUDIO AUDIO
A stereo miniplug cable can be used to connect the
audio output from the component connected to
INPUT2, to the Plasma Display's AUDIO (INPUT2) jack
(L/R).
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals
according to the video input selection.
Audio connection for component connected to
INPUT5
INPUT5
AUDIO
R L
The audio line for the component connected to INPUT5
can be connected to the AUDIO R/L (INPUT5) pin jacks.
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals
according to the video input selection.