Connecting Devices - Avermedia AVerDiGi EB1304 NET Operation Manual

5. Connect the end of the IDE cable
and the power connector to the hard
disk
7. Push the cover forward
9. You may now connect all the cables. When the power is connected, the Power
LED light turns on

1.5.2 Connecting Devices

The back panel of the DVR unit, user can connect up to 4 video cameras, 4 sensor
devices, 1 alarm device and output video to a TV or CRT/LCD monitor. Connecting
the unit to a pen drive or external hard disk through USB connection for backup,
then use the bundled software enables user to transfer, playback and segment the
video. Follow the illustration below to make the connection:
6. Secure the hard disk inside the unit
then replace unit cover
8. Secure the cover
5