Teleco UST DK User Manual page 94

Messages ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
3. Enter the message.
(See "Entering LCD
Characters" on Page
91.)
4. Repeat Steps 1~3 for
any additional
messages you want to
store.
5. Press
...or
Advisory Messaging
To set an advisory message for incoming calls
1. Press
...or a [PDN] +
2. Enter the desired
message number:
~
...or
3. Press
...or
4. If you have Call
Forward set, press
message instead of
the CF display.
94
The LCD Msg Select/[PDN] LED lights steadily, and the LCD
displays the message. The message is now stored in system
memory.
The message displays on your LCD an Advisory Message (see
below). To cancel the message display, press [PDN] and dial
or press
.
The LCD Msg Select/[PDN] LED
flashes.
.
The selected message displays. (This
assumes the message has already been
stored in memory.)
(station)
~ (system)
The message displays on your telephone's LCD. The LCD Msg
Select/[PDN] LED lights continuously. The selected message
is sent to LCD phones when they call your [PDN] or any
.
[PhDN] owned by the telephone.
to display the
.
MSG NO. ?
MSG NO. 10
UST DK Digital Telephone