Teleco UST DK User Manual page 121

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Table 17 Feature Button Definitions (continued)
UST 1000-series
Telephone
Appendix
Direct Station Selection Button(s)-
Press to ring a preselected station. The LED associated with each DSS button provides
the status (idle/busy) of the station assigned to the button.
Flash Button-
Press to perform the following functions: Disconnect and recall dial tone on a CO line;
access Centrex or PBX features; enter a pause or flash signal when programming
speed dial numbers.
Group Pickup Button-
Press to pick up a call ringing a station that belongs to a Pickup Group of which your
station is a member.
Handset Off-hook Call Announce Button-
Press this key while off-hook busy with a call and while being called by an internal caller
who initiates off-hook call announce to switch the talk path from the current call to the
off-hook call announce internal caller.
Message Select Button-
Press to allow system and personal messages to be displayed on the optional 32-
character Liquid Crystal Display (LCD).
Line Button-
Press to answer or access an outside Central Office (CO) line.
Unanswered (Lost) Call Automatic Dial Button-
Press to automatically dial the stored ANI (Automatic Number Identification) or Caller ID
number shown on the LCD. Unanswered calls will be stored on this button and on the
LCD.
Microphone Cutoff Button-
Press to turn the microphone off/on while idle, providing privacy when you receive
handsfree internal calls. Also functional when your station receives calls—the Mic button
controls the microphone when you originate calls.
Modem Button-
Press to reserve a modem from a pool. The LED of the button indicates the status of the
modem pool. See the UST DK PC/Data Interface User Guide .
Definitions
Button Labels
121