Teleco UST DK User Manual page 103

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
To erase name/number display
1. Press [DN] +
2. Press
mode to enter blanks.
3. Press
LCD Operation
During clear:
After clear: A name is displaced by
message and call forward settings if
they are set.
Note
Current information displays on the
. lower line of the LCD.
in the alpha Blank characters replace the information.
. The information is erased and the [PDN] of the telephone is
displayed.
This procedure does not erase
the name/number. To restore
the display, press [DN] +
.
Name/Number Display
NO. 213
USER NAME RESET
NO. 213
DATE DAY TIME
USER NAME ?
103