Teleco UST DK User Manual page 35

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Call Forward–Fixed
Press
or voice mail device set in system programming.
...or press
Call Forward—External
1. Store the destination
number at Station
Speed Dial location
Code 49.
Only perform Step 1
the first time Call
Forward-External is
set or when you
change the
destination. It is not
necessary to store the
destination each time;
it remains in system
memory.
2. To set CF-External,
press
...or the [PDN]/
[PhDN] +
To cancel a Call Forward—External
Press
...or [PDN] +
Features
. The LED lights steady red and all calls forward to a station [PDN]
a second time to cancel the feature.
This feature enables you to forward new incoming calls
directed to your [PDN] to a destination outside of the system.
[PhDNs] assigned to your telephone do not Call Forward to an
external destination. Internal calls and transferred calls to your
[PDN] do not forward to external destinations.
Only incoming calls over CO lines dedicated to immediately
ring on your [PDN], private CO
Dial line calls forward. Any of the other Call Forward modes
can be set for your [PDNs] or [PhDNs] simultaneously with
Call Forward-External.
Use the Speed Dial storage procedures detailed on Page 64.
When forwarding to an outside destination include the CO
Line (or CO Line group) access code before the telephone
number.
Example: 8015833700
801 = CO Line access code
5833700 = Telephone number
See Table 12 on Page 113 for CO Line/Line Group access
codes. The LCR access code "9" cannot be used.
Incoming calls forward to the destination stored at Station
Speed Dial Location 49.
.
+
Call Forward
button, and/or Direct In
35