Teleco UST DK User Manual page 119

Button Labels
All flexible buttons must be programmed for your telephone in system programming and vary
for individual telephones. If a button does not appear on your display or telephone keystrip
label, see your System Administrator for button assignments.
The button labels in this guide are for the UST 1000-series telephone mode
Table 17 Feature Button Definitions
UST 1000-series
Telephone
Appendix
Account Code Button-
Press to enter a Voluntary Account Code anytime during a Central Office (CO) line call
without interrupting the conversation.
Alarm Reset Button-
Press to turn off a telephone alarm connected to a facility alarm mechanism.
Alert Signaling Buttons-
Press to alert a predesignated station with a distinctive sound and to indicate a pre-
arranged meaning and visual indication to a predesignated station. Up to four Alert
Signal buttons can be assigned to a telephone.
All Call Voice Page Button-
Press to page all of the digital and electronic telephones in the All Call Page group.
Automatic Busy Redial Button-
Press to set up Automatic Busy Redial after receiving a busy tone on a dialed CO line
call (not available when calling on tie or DID CO lines).
Definitions
C
119