Teleco UST DK User Manual page 123

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Table 17 Feature Button Definitions (continued)
UST 1000-series
Telephone
Appendix
Release and Answer Button-
Press to disconnect or complete the transfer the current CO or [DN] call and
automatically answer the new incoming CO or [DN] call.
Release Button-
Press to disconnect or complete the transfer of the current CO or [DN] call and to place
your station in the idle condition.
Save Button-
After dialing an outside or internal directory number, press to "save" the number. Later,
you can have the system automatically redial the number for you when you press the
button after accessing an internal or outside line.
Speed Dial Button-
Press to Speed Dial a telephone number or feature access codes. SD buttons can be
used as either System Speed Dial numbers or Station Speed Dial numbers.
Speed Dial Select Button-
Press (in conjuncton with Redial) to store and access Speed Dial number.
Pause (Long) Button-
Press to insert a 10-second pause when programming Speed Dial numbers.
Pause Button-
Press to set either a one-half or two-second pause when programming Speed Dial
numbers. (The pause time is set in system programming).
Background Music Button-
Press to turn Background Music on or off over your station speaker.
Tone Button-
Press to change the outgoing dialing of the CO line in use from dial pulse to tone
signaling.
Door Lock Buttons-
Press to unlock a door lock mechanism.
Definitions
Button Labels
123