Teleco UST DK User Manual page 53

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
To cancel the Msg light
Press
handset.
...or [DN] +
cancel the light. This
must be done for each
message recorded.
Message Waiting Light on [PhDN/MW]
To respond to [PhDN/MW]
1. Press the flashing red
[PhDN/MW] LED.
2. After receiving the
message, press
...or place the handset
on-hook.
To cancel [PhDN/MW]
1. Press [PhDN].
2. Enter
3. Press
Features
and lift the Your Msg LED turns OFF when the called party answers.
The called party must answer—by either going off-
Note
hook or by pressing
cancelled automatically.
to Your Msg LED turns OFF without calling the telephone or VM
device.
Your phone rings the station or voice mail device that left the
message. If the called party or VM device answers, the
message waiting indication is cancelled automatically. If there
is no answer, hang up and try at a later time. The red
[PhDN/MW] LED on your phone continues to flash.
If you have more messages, the red [PhDN/MW] LED
continues to flash. To answer the next message. Repeat this
procedure.
You hear a steady dial tone.
. The dial tone stops.
. The [PhDN/MW] LED turns OFF, indicating that the message
has been canceled.
Message Waiting
—for the indication to be
53