Console Operation; The Off Mode; The Chime Mode - Linear SSD8 Installation Instructions & Owner's Manual

CONSOLE OPERATION

SYSTEM MODES
Off Chime
SYSTEM
DISARMED
TO ARM THE SYSTEM
FROM
MODE
Off
OR
Chime
FOR TWO SECONDS
FROM
MODE
Chime
PRESS
OR
Home
FOR TWO SECONDS
TO DISARM THE SYSTEM
FROM
Home MODE
ENTER
OR YOUR SECRET CODE
MODE
Away

THE OFF MODE

DOOR/WINDOW SENSORS DISARMED
MOTION DETECTORS DISARMED

THE CHIME MODE

DOOR/WINDOW SENSORS DING-DONG
MOTION DETECTORS DISARMED
CAUTION
IF YOU HEAR MULTIPLE BEEPS WHEN DISARMING THE
CONSOLE TO OFF OR CHIME MODE,
AN ALARM HAS OCCURED WHILE YOU WERE AWAY.
AN INTRUDER MAY STILL BE PRESENT, USE CAUTION.
6
Home Away
SYSTEM
ARMED
PRESS
OR
Home Away
Away
PRESS
Off
OR
Chime
The Console has four operating modes: Off, Chime,
Home, and Away.
Each mode controls how the system will react to
signals from the sensors.
From the Off Mode, the system can be "quick armed"
to the Chime, Home, or Away Modes by pressing the
desired mode button for two seconds.
From the Chime Mode, the system can be "quick
armed" to the Home or Away Modes by pressing the
desired mode button for two seconds.
To disarm the system to the Off or Chime Mode, the
secret code must be entered before pressing the
[OFF] or [CHIME] button.
The emergency siren can be activated in any system
mode by using the optional 2-button remote control.
The volume control (located on the Console's bottom)
adjusts the volume of the advisory tones, beeps, and
gongs. It does not affect the siren volume.
Alarm sirens will automatically stop after five minutes.
Arming the system clears the alarm memory
(blinking sensor status indicators).
If there is a complete power failure(with no backup
batteries installed), when power is restored, the
system will restart in the Away Mode.
The sensor status indicators are active in all system modes.
Use the Off Mode to disarm the system.
To select Off Mode, enter your secret code and
press [OFF].
Disarming the system stops any alarm sirens in progress.
Multiple beeps will sound if an alarm has occurred
when the system was armed (check for a blinking
sensor status indicator).
Use the Chime Mode as an automatic chime.
To select Chime Mode from Off, press and hold the
[CHIME] button for two seconds.
To select Chime Mode from Home or Away, enter
your secret code and press [CHIME].
Opening any protected door or window will sound a
"ding-dong" from the Console's speaker.
Switching to Chime Mode from Home or Away Mode
will disarm the system.
Multiple beeps will sound if an alarm has occurred
when the system was armed (check for a blinking
sensor status indicator).