Two-Button Remote Control Accessory; Motion Detector Accessory; Glass Break Sensor Accessory - Linear SSD8 Installation Instructions & Owner's Manual

TWO-BUTTON REMOTE CONTROL ACCESSORY

PRESS RIGHT
BUTTON TO
DISARM SYSTEM
PRESS LEFT
BUTTON TO
ARM SYSTEM
CAUTION
IF YOU HEAR MULTIPLE BEEPS WHEN DISARMING THE
CONSOLE TO OFF OR CHIME MODE,
AN ALARM HAS OCCURED WHILE YOU WERE AWAY.
AN INTRUDER MAY STILL BE PRESENT, USE CAUTION.

MOTION DETECTOR ACCESSORY

PRESS BUTTON
TO TEST MOTION
DETECTOR AND TO
TRIGGER SENSOR
WHEN ADDING UNIT
TO THE SYSTEM

GLASS BREAK SENSOR ACCESSORY

GLASS BREAK SENSOR
WIRES TO A DOOR/WINDOW
SENSOR (SOLD SEPARATELY)
SENSOR SENSITIVITY
IS ADJUSTABLE
For remote control of the system, two-button remote
controls can be purchased.
The two-button remote control can be used to arm or
disarm the Console and trigger the emergency siren.
PRESS BOTH
BUTTONS TO
It is supplied with a snap-action key ring.
TRIGGER THE
EMERGENCY
Pressing the left remote control button arms the
SIREN
system to the Away Mode, sounding one chirp.
Pressing the right remote control button disarms the
system to the Off Mode, sounding two chirps.
Pressing both buttons triggers the system's
emergency siren.
Labels are provided with the remote to identify the
buttons.
Before using the remote, it must be added as a
sensor to the system (see Adding & Removing
Sensors). NOTE: Each remote control requires one
sensor location.
For interior protection, motion detectors can be
purchased.
The motion detector can trigger the alarm in the
Away Mode when motion is sensed in its protection
area.
In the Home Mode, the motion detector is disabled.
Install and test the detector as described in its
installation instructions.
Before using the motion detector, it must be added
as a sensor to the system (see Adding & Removing
Sensors).
To detect breaking window glass, a glass break
sensor accessory can be purchased to attach to a
door/window sensor (sold separately).
The glass break sensor sticks on the window glass
with adhesive and is wired to terminals inside the
door/window sensor.
If the glass breaks, the glass break sensor triggers
the door/window sensor, which sends a signal to the
Console. The alarm will sound if the system is armed
in the Home or Away Mode.
Install and adjust the glass break sensor as
described in its installation instructions.
Set the door/window sensor switch to instant and
program the door/window sensor into the Console
(see Adding & Removing Sensors).
11