USE AND FUNCTIONING
Startup stylus calibration on Windows CE
When starting the terminal, a stylus calibration screen comes up if valid
calibration settings are not available. This happens in the following
circumstances:
1.
At the first startup of the terminal.
2.
After restoring registry default settings using the applet Registry Admin
and performing a warm boot.
3.
After a Clean Boot.
4.
After a Firmware Update (see par. 4.10).
Startup stylus calibration on Windows Mobile
When starting the terminal, a Welcome Wizard (with Stylus Calibration) comes
up if valid calibration settings are not available. This happens in the following
circumstances:
1.
At the first startup of the terminal.
2.
After restoring registry default settings using the applet Registry Admin
and
performing a boot.
3.
After a Clean Boot.
Figure 4
4
57