Datalogic Memor User Manual page 62

1 4
To recalibrate the touch screen on Windows Mobile, complete the following
steps:
1. Select Start > Settings > System > Screen to open the Screen
Settings dialog as shown in Figure 3.
2. Tap Align Screen to open the Calibration screen shown in Figure 4.
3. Carefully press and briefly hold stylus on the center of the target. Repeat
as the target moves around the screen. Press the <ESC> key at any time
to cancel the stylus calibration.
4. By completing the calibration procedure you implicitly accept the new
calibration settings.
5. New calibration settings are persistently saved in registry.
56
Figure 2
Figure 3
MEMOR™