Datalogic Memor User Manual page 12

1 1
b.
c.
6. Close the battery cover properly, by pressing the latch release button
and pulling the latch down.
To remove the Micro SD card, follow the steps above to access the SD area,
and remove it from its slot.
Follow proper ESD precautions to avoid damaging the SD.
Proper ESD precautions include, but are not limited to, working
on an ESD mat and ensuring that the operator is properly
grounded.
Do not force the card. If you feel resistance, remove the card,
CAUTION
check the orientation, and reinsert it.
Do not use the Micro SD card slot for any other accessories.
6
Shift the cardholder to the left and then pull it up; insert the
Micro SD card with the written part upward.
Lock the card into place by pushing the cardholder down
and then shifting it to the right; pull the locking plate down.
MEMOR™