Imager Data Capture - Datalogic Memor User Manual

MEMOR™
1 4
4.3.2

Imager Data Capture

The Memor Imager captures a picture of the entire bar code. The omni-
directional scanning does not require that the operator orient the bar code to
align with the scan pattern.
To read a 1D or 2D code, simply point the Memor Imager model onto the code
and press the SCAN Key.
The Memor Imager uses an intelligent aiming system pattern, similar to those
on cameras, indicating the field of view, which should be positioned over the
code:
Aiming System
If the aiming system pattern is centered over the entire symbology as shown in
the following figure, either wait for the timeout or release the Scan key to
capture the image.
A red beam illuminates the code, which is captured and decoded. You will get a
good read.
32