Datalogic Memor User Manual page 44

1 4
necessary when the Windows Mobile operating system locks up and the warm
boot command does not work.
To perform a cold boot, press and hold the following keys simultaneously:
Clean Boot
A clean boot is a cold boot that causes the device to be restored to a clean
configuration. The Memor will be reset to its factory configuration only if the user
has not installed any additional package. Please note that you will lose any
applications and data stored in persistent flash memory.
To perform a clean boot, follow these steps:
1. Perform a Cold Boot (see Cold Boot).
2. Quickly release all the keys when the screen goes black.
3. Within 1 second press and hold down the Esc and 0 keys until the left
orange led starts blinking.
4. Release the Esc and 0 keys.
5. Enter 1 to proceed with the Clean Boot sequence. Enter 0 to cancel the
Clean Boot and proceed with a Cold Boot.
Warm Boot
REGISTRY Restored from
flash
Preserved
File
System
38
Cold Boot
Restored from
flash
Preserved
Clean Boot
Clean configuration
user config)
Clean Installation (no user
files)
MEMOR™
(no