Accessories; Belt Clips; Telephone Lanyard - Avaya 3725 User Manual

A long press on the *- key changes the tone sender on.
●
Tone sender on is indicated by a T in the display.
In text input mode
A short press on a key 0 - 9, displays the first available character on that specific key. The
●
marked character is selected after a timeout, or when another key is pressed.
To change to upper/lower case, press the *-key before entering the character.
●
The *-key can also be used to display only the digits.
To add space in the text, make a short press on key 0.
●
The first character entered in a message, or when adding/editing a name in the Contacts
●
menu, will be an upper level character followed by lower level characters, unless the *-key
is pressed before entering the character. To switch between Abc, ABC, abc, and 123 the
*-key is pressed.
A long press on the key # displays special characters.
●
To delete a character, position the prompt right from the character to delete and press Soft
●
key Clear.

Accessories

Belt Clips

Three belt clip options are available:
Hinge-type clip
●
To prevent the telephone from slipping out of for example pocket or belt
Swivel-type clip
●
To be able to rotate without slipping out from the case
No clip
●
To be able to use the telephone without a clip
To be able to use the telephone without a clip, a cover plate without a clip is also available.

Telephone lanyard

The Telephone lanyard is attached directly to an eyelet on top of the telephone. It is 800 mm
long and can be worn around the neck.
Avaya 3725 DECT Telephone - User Guide
Descriptions
31
09/2012