1. Press Soft key More.
2. Select Audio transfer.
3. Press Soft key Select.
Note:
Audio transfer is visible if Bluetooth connection is active.
Note:
Start a New Call during Conversation
1. Press Off-hook key.
The first caller is put on hold.
2. Dial the number.
Note:
You can also start a new call using the Soft key More > New Call. Dial the
Note:
number and press the Soft key Call.
Note:
To use the handset contacts to start a new call, just select More > Contacts (See
Note:
Contacts
Soft key More > New Call, you cannot select a contact afterward.
Switch between Calls
A new call is started during conversation, the first call is on hold.
1. Press Soft key R.
This will switch between the calls.
Note:
You can also switch between the call via Soft key More > Switch.
Note:
End a Call
A new call is started during conversation, the first call is on hold.
1. Press the On-Hook key.
This will end the current call. The held call rings again as priority call.
Note:
You can also end the call via the Soft key More > End Call.
Note:
It is also possible to end a call by putting the telephone in a charger according to
the In Charger > Call behavior > End call setting. Note that all ongoing calls will
be disconnected. See Installation and Administration Manual, DECT R4.
Avaya 3725 DECT Telephone - User Guide
on page 69). If you start a new call by using the Off-hook key or the
Calling
49
09/2012