Care And Cleaning - Jenn-Air Attrezzi JBL800 User Manual

Care and Cleaning

Injury hazard. Unplug blender before cleaning. Failure to do so
can result in injury.
1. Touch the "OFF" pad to set the blender into its full-off state.
Unplug the power cord.
2. Position blender pitcher over a sink to catch any remaining
ingredients in the pitcher while taking it apart to clean.
3. Unscrew the base ring from the base of the
pitcher (see illustrations A and B). If the base is
difficult to unscrew, place the pitcher on the
power base and turn the pitcher
counterclockwise with both hands to loosen
and remove (see illustration C). DO NOT turn
the pitcher using the handle.
4. Carefully disassemble the pitcher gasket and
the blade base, keeping fingers away from
sharp edges of the blades.
5. All of the pitcher parts should be washed in
warm, soapy water. The pitcher jar is
dishwasher safe. The pitcher lid, base ring,
and blade base are all top-rack dishwasher
safe. The pitcher gasket and lid cap can be
handwashed in warm, soapy water.
6. Wipe down the blender power base, including
the glass touch controls with a damp cloth.
DO NOT immerse the blender base in water.
Do not use an abrasive cleaning pad on the power base unit.
7. DO NOT use pine-based cleaners or cleaners containing bleach
on the blender base. Do not use any type of solvent-based
cleaner or metal polish on the power base unit. Use of these
products may cause staining or discoloration. If these cleaning
products DO come in contact with the power base, immediately
clean with a water-dampened cloth, and wipe dry.
WARNING
10
A
B
C