Care And Cleaning - Jenn-Air JBL800 User Manual

Care and Cleaning
1. Touch the "OFF" pad to set the blender into its full
oil state. Unplug the power cord.
2. Position blcMer pitcher over a sink to catch anv
remaining ingredients in the pitcher while taking it
apart to clean.
3. Unscrew the base ring fl'om the base of the pitcher
(see illustrations A and B). If the base is ditiicuh to
unscre_x; place the pitcher on the power base and
turn tbe pitcher counterclockwise with both bands
to loosen and remove (see illustration C). I)O NOT
turn the pitcher using the handle.
4. Careiully disassemble the pitcher gasket and the
blade base, keeping fingers away fl'om sharp edges of
the blades.
5. All of the pitcher parts should be washed in warm,
soapy water. The pitcher jar is dishwasher safe. The
pitcher lid, base ring and blade base are all top rack
dishwasher safe. The pitcher gasket and lid cap can be
bandwashed in warm, soapy water.
6. Wipe down the blender power base, including the
glass touch controls with a damp cloth. I)O NOT
immerse the blender base in water. I)o not use an
abrasive cleaning pad on the power base unit.
7. I)O NOT use pine based cleaners or cleaners con
B
raining bleach on the bleMer base. I)o not use any type of solvent based
cleaner or metal polish on the power base unit. Use of these products may
cause staining or discoloration. If these cleaning products
I)O come in contact
with the power base, immediately clean with a water dampened cloth and
wipe dry.
12