Assembling Your Blender - Jenn-Air Attrezzi JBL800 User Manual

Assembling Your Blender

1. Carefully remove all blender parts from the packaging.
2. Place the blender power base on a solid, level surface.
3. Before first use, wash the pitcher jar, pitcher lid,
pitcher lid cap, pitcher gasket, blade base, and
base ring in hot, soapy water. Rinse and dry. The
pitcher jar is dishwasher safe. The pitcher lid,
base ring, and blade base are all top-rack
dishwasher safe.
4. Carefully place the pitcher gasket over the blade
base, while keeping fingers away from the blades.
5. Turn the pitcher jar upside down.
6. Using caution, place the blade base and pitcher
gasket into the bottom opening of the pitcher
jar.
7. Twist the base ring onto bottom of pitcher jar,
making sure it threads evenly and secures the
pitcher gasket and blade base in place. The
base ring should be tightened hand-tight onto
the pitcher jar. Do not over-tighten.
8. Turn the pitcher jar right side up and place
it on top of the blender power base and
turn clockwise to lock the pitcher in place.
9. Insert the pitcher lid cap into the pitcher lid
and tighten it by turning clockwise. Place
the pitcher lid onto the pitcher jar.
10. Plug the detachable power cord into the
blender power base and a properly
grounded 3-prong electrical outlet. The
blender is now ready to use.
Electrical Shock Hazard – Plug into grounded outlet. Do not
remove ground prong. Do not use an adapter. Failure to follow
these instructions can result in death or electrical shock.
WARNING
5