Delete A Par Can Chase - Elation DMX Operator Pro User Manual

7.8.3 Delete a Par Can Chase

(1) Press and hold down the "RECORD" button for three (3) seconds or until the green
LED next to the RECORD button comes on. The LCD will display the following:
(2) Select the "CHASE" button 1-6, that you wish to delete. The selected CHASE LED
will flash repeatedly. For example, if you select CHASE #1, the LED above the #1
CHASE button will flash repeatedly and your LCD will display the following:
(3) Press and hold down the same "CHASE" button then press the "DEL" button one (1)
time. The LCD will momentarily display "DEL ONE PROGRAM PLEASE WAIT...."
Once the Chase has been deleted from memory, the LCD will display the following:
(4) At this point you can record a new Chase on the same Chase button or press "ESC"
one (1) time and repeat steps 2 & 3 to delete additional Chases.
(5) To exit, press the "ESC" button two (2) times.
SELECT A SCENE
OR CHASE! PAGE01
EDIT CHASE1/TLXX
ADD ESC STEPXX
• TLXX = Total Chase steps.
EDIT CHASE1/TL00
ADD ESC STEP00
• TL00 = Indicates that there are zero (0) steps in this Chase.
DMX OPERATOR PRO
30