Delete Moving Light Shows - Elation DMX Operator Pro User Manual

7.5.3 Delete Moving Light Shows

(1) Press and hold down the "RECORD" button for three (3) seconds or until the green
LED next to the RECORD button comes on. The LCD will display the following:
(2) Select the "SHOW" button 1-8, that you wish to delete. The selected SHOW LED will
flash repeatedly. For example, if you select SHOW #1, the LED above the #1 SHOW
button will flash repeatedly and your LCD will display the following:
(3) Press and hold down the same "SHOW" button then press the "DEL" button one (1)
time. The LCD will momentarily display "DEL ONE PROGRAM PLEASE WAIT...."
Once the Show has been deleted from memory, the LCD will display the following:
(4) At this point you can record a new Show on the same Show button or press "ESC"
one (1) time and repeat steps 2 & 3 to delete additional Shows.
(5) To exit Show delete mode, press "ESC" two (2) times.
SELECT A SCENE
OR SHOW! PAGE01
EDIT SHOW1/TLXX
ADD ESC STEPXX
• TLXX = Total Show steps.
EDIT SHOW1/TL00
ADD ESC STEP00
• TL00 = Indicates that there are zero (0) steps in this Show.
DMX OPERATOR PRO
22