Setting Dmx Address Channels For Moving Lights - Elation DMX Operator Pro User Manual

7.1.1 Setting DMX Address Channels for Moving Lights

Every fixture in the link must be assigned a DMX address channel, also known as a start channel,
which is the first channel the controller uses to send information to the fixtures. The DMX
Operator Pro allows for control of up to 8 individual fixtures each occupying 16 DMX channels.
Fixtures of the same type can share the same address and will mimic each others behavior. There
is no fixture library incorporated into the DMX Operator Pro. Each fixture is automatically
assigned sixteen DMX channels regardless of how may channels it uses. Therefore, the starting
address channel for each fixture has been predefined. Please see below for additional
instructions on assigning your fixtures.
(1) Set the starting DMX address channel on your first moving light fixture to one (1).
(2) Set the DMX channel on your second moving light fixture to seventeen (17).
(3) Set the DMX channel on your third fixture to thirty three (33).
(4) Set the DMX channel on your fourth fixture to forty nine (49).
(5)
Continue to address the remainder of your fixtures according to the chart below
Fixture # 1
DMX
Channel 1
2 3 4
17 33 49
DMX OPERATOR PRO
5 6 7
65 81 97
.
8
113
10