4.
Figure 88.
5.
6.
Note: Extend the crosscut fence slide if the
workpiece is more than 74".
7.
8.
Figure 88
Steps 3–5
Figure 84
Crosscutting Smaller Panels
Size Panels
Figure 87
Figure 85
Crosscutting Using Rip Fence as a
Cut-Off Gauge
1.
Full Size Panels
Figure 87
When using the rip fence with the cross-
cut fence, the rip fence must be positioned
behind the front edge of the blade to prevent
the workpiece from binding and causing a
kickback hazard.
2.
Figure 89
Figure 89.
3.
Crosscutting Full
Page 50
Crosscutting
Page 50