Call Transfer; Three-Way Conference Call; Activate/Deactivate Call Forwarding - ASCOM Eurit 20 Operating Manual

Using the extended-feature functions

Call transfer

You have set up two calls and wish to connect the two parties with one another and hang up.
Your Telecom will provide information on the introduction date for this service.
Even after the call is transferred, it is charged to the original calling party.
For call transfers in PBXs, see "PBX Operation", p.18

Three-way conference call

If you are conducting two calls and wish to speak to both parties simultaneously:
Press the Foxkey followed by "3" again to terminate the conference call. The two calls
remain active and you can switch between them (brokering).

Activate/deactivate call forwarding

Supplementary service.
You can only forward incoming calls if the corresponding destination number has been program-
med (see p.14).
Option 1 -> Unconditional
Call is forwarded immediately
Option 2 -> Busy
Calls is forwarded only if your telephone is busy
Option 3 -> Delayed
If you do not answer the call within 15 seconds of hearing the ringing signal,
the call is forwarded.
To deactivate call forwarding, press the Foxkey followed by "4" and "0". The function is
deactivated and the call forwarding symbol is no longer displayed.
Press the Foxkey followed by "2" to connect the two parties.
Replace handset.
Press the Foxkey followed by "3"
The "Team" symbol is displayed. You have activated a three-
way conference call
Press the Foxkey followed by "4", followed by "1", "2" or
"3" (call forwarding options).
"Processing" is displayed, followed shortly by the symbol
The call forwarding function is now activated.
8