Setting The Ringing Melody / Volume; Deleting The Call Charge Total; Programming The Parking Id - ASCOM Eurit 20 Operating Manual

Programming your telephone

Setting the ringing melody / volume

You have a choice of four ringing melodies and three volume settings for your telephone.
Keys "1", "2" or "3" ->
Keys "4", "5" or "6" ->
Keys "7", "8" or "9" ->
Keys "*", "0" or "#" ->
Press the memory key to store the selected ringing melody and quit programming.

Deleting the call charge total

Programming the parking ID

You wish to park the current call with a defined call ID and retrieve it elsewhere.
Use the Foxkey to delete a programmed call ID and then terminate the procedure using
the memory key.
Note that only one digit (0 to 9 or #) can be entered as the parking ID. If you have de-
fined "#" as the parking ID, the user is always requested to enter the parking ID (auto-
matic parking option no longer available).
Press the Foxkey for 3 seconds followed by "1" and "6".
The display prompts you to define the desired melody or
volume as follows:
Melody 1 with "1" = soft, "2" = medium, "3" = loud
Melody 2 with "4" = soft, "5" = medium, "6" = loud
Melody 3 with "7" = soft, "8" = medium, "9" = loud
Melody 4 with "*" = soft, "0" = medium, "#" = loud
Press the Foxkey for 3 seconds followed by "9", to display
the charge total.
Press the END key for 3 seconds.
The charge total is deleted and the display is reset to "0.00".
Press the Foxkey for 3 seconds followed by "1" and "3".
The display prompts you to enter the parking ID.
Enter the parking ID.
Press the memory key to store the parking ID.
15