Making A Call; Incoming Calls; On-Hook Dialling; Dialling A Number From The Speed-Dial Memory - ASCOM Eurit 20 Operating Manual

Making a call

Incoming calls

For incoming calls, the caller's number is displayed even before you lift the handset.

On-hook dialling

Dialling a number from the speed-dial memory

Dialling using the last number redial key

Long telephone numbers can be scrolled by pressing the Foxkey.

Dialling a number from the caller list

Long telephone numbers can be scrolled by pressing the Foxkey.
Long numbers can be scrolled by pressing the Foxkey
followed by the memory key.
Enter the number you wish to call, lift the handset or press
the loudspeaker key once the connection has been esta-
blished.
Press the memory key followed by the number under which
the full telephone number is stored (0 to 9), lift the handset
or press the loudspeaker key.
See page 13 for instructions on how to programme your
speed-dial memory.
Press the last number redial key, several times if necessary, to
retrieve one of the last 9 dialled numbers, lift the handset or
press the loudspeaker key.
To delete numbers from the last number redial memory,
press the last number redial key repeatedly until the number
to be deleted is displayed. Press the END key for 3 seconds to
delete the number.
The display indicates the number of unanswered calls
(maximum 20).
Press the memory key twice to show the number of the last
caller. Press again to show the next stored number, and so
on. Lift handset or press loudspeaker key.
To delete numbers from the caller list, press the memory key
until the number to be deleted is displayed. Then press the
END key for 3 seconds to delete the number.
5