Table of Contents
Advertisement
mode.
3. Slide the POWER OFF/BLUETOOTH AND AUX SWITCH to Power off
position when you finish listening. Don't forget to switch off the power of your
external device as well.
1.
Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2.
Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the USB port of power source
when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture.
Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinet.
If the cabinet becomes dirty or smudged with fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths
or polishes as these will damage the finish of your unit.
:
CAUTION
Never allow any water or other liquids to get inside the unit while
cleaning.
Symptom
No Charging
No Sound
Sound is
distorted.
CARE AND MAINTENANCE
TROUBLESHOOTING GUIDE
Possible Problem
The USB power adaptor
(not included) is not
plugged into a wall outlet or
the USB cable (included) is
not plugged into the mini
USB jack on the
SMPS-625.
Wall outlet is not
functioning.
Computer USB port is not
functioning.
The SMPS-625 battery is
dead.
The SMPS-625 is not linked
with the Bluetooth enabled
device.
The SMPS-625 placement
out of range.
Volume set too low.
Volume level is set too high.
Sound source is distorted.
Solution
Plug the USB power adaptor (not included)
into a wall outlet and plug the USB cable
(included) into the mini USB jack on the
SMPS-625.
Plug another device into the same outlet to
confirm the outlet is working.
Make sure your computer power is turned on
and try another USB port.
Recharge the SMPS-625 battery.
Go through "Operating the Unit" process to
link the speaker.
Relocate the SMPS-625 within Bluetooth
operating range (30 feet).
Press the Volume + button to turn the sound
level up.
Decrease the volume of the speaker.
If the source sound file is of poor quality,
distortion and noise are easily noticed with
high-power speakers. Try a different audio
source such as a music CD.
If you are using an external sound source like
older generation of iPod, try reducing the
output volume on the device itself. Also try
turning bass boost OFF or change the EQ
E7
Advertisement
Table of Contents
